Automatic Reactive Power Compensation and Harmonic Filtering Device with Cables PF

• Customization: Available
• Type: Power
• Structure: Fixed Board
• Model NO.: suar
• Form: All- packaged Type
• Operation Voltage: Low Voltage
• Size: 1 Uint
• Application Range: High-rise Buildings
• Shell Material: Steel Plate
• Shell Protection Grade: IP30
• Brand: Sanhe
• Transport Package: Plywood Carton
• Specification: 35kvar
• Trademark: sanhe
• Origin: Shenzhen
• HS Code: 8543709990
• Production Capacity: 5000

Product Description

SUAR realize the balanced three phase through step-by-step work,first the current transformer real-time monitoring of the load side of the current, and DSP processing and analysis of this data and calculation of equilibrium required for each phase of the compensation current, then drive the IGBT output, to achieve the object.

Feature:

Main power module inverter adopts international famous brand IGBT devices;

A variety of control modes can be set freely according to demand;

With full protection features including overload, overcurrent, short circuit, the system starts with self-diagnostic function;

Start with a buffer control circuit can be avoided from the start instant excessive input current ;

Divided with independent control, both to balance the load current, but also to achieve single-phase, three-phase reactive power compensation;

Built-in wireless communication module, can achieve remote monitoring and data acquisition;

Device uses the column installation, commissioning maintenance is simple, easy to transport.

citor compensation scheme, it is precise, two-way, fast reactive power compensation capabilities, and to eliminate the risk of capacitive system harmonics; Compared with the traditional SVG program, it can resolve the problem of harmonic and reactive power. It is equipped with high quality power factor controller SGC .
     The Wall Mounted type is preferred to be used in equipment improvement which is very conveninet to install. It can be used to filter harmonics.
 -phone APP operation to run or stop,set parameters or check data
- the 3-Level Topology Design Approach 
- step-less reactive power compensation for inductive and capacitor loads.   
- Optimal solution to reactive compensation and three-phase unbalanced compensation
- Integrating general LC compensation with the latest SVG compensation technology
- Integrated Control & Monitoring System (ICMS)with 18 I/O ports to implementflexibleLC and SVG applications
-PF= 0.99, avoiding over-compensation and under-compensation
-Ultra-compact, space economical / User-friendly, ease of commissioning / Parallel capability 
-Available in rack, wall mounting designs and complete enclosure type 
 
 

Parameter:

Model No#	SUAR-0.4/50		SUAR-0.4/75		SUAR-0.4/100
System
Nominal Voltage	380V
Input phase voltage range	80%~120%
Power Grid Frequency	50Hz
Efficiency	>97.5%
Wiring	3P3W/3P4W
topology	3 level topology
Parameter
Compensation	Unbalance <5%
Nominal Current	50A		75A		100A
Reactive power Compensation Output	Capacitive or inductive output
Reactive power Compensation Capacity	35kvar		50kvar		70kvar
Reactive power Compensation Rate	>99%
Response	<15ms
Protection Function	Output over-current, over-voltage power grid, the system over-temperature, wrong sequence, Resonance protection, synchronization failure, frequency deviation, short circuit protection
Telecommunication
Telecom.Sort		RS485/Ethernet/WIFI
Telecom.Contract		Modbus
Mechanical
Size	692×587×1160(mm) (W×D×H)			692×587×1160(mm) (W×D×H)	692×587×1160(mm) (W×D×H)
Color	Stainless Steel
Weight	60kg		70kg		100kg
Installation	Outdoor
Environmental
Working Temp.	-20 ºC  ~  +50 ºC
Altitude	<1500m
IP class	IP44