High Voltage Surge Capacitor
Introduction:protect electronic devices and electrical equipment from voltage spikes or transient overvoltage
Model:FAM
Installation:Indoor or outdoor
Brand:Sanhe
High Voltage Surge Capacitor
Introduction:
Surge capacitor is also called protective capacitor,widely being used to restrain switching overvoltage and atmosphere overvoltage. Usually, it is connected with a high voltage resistor in series to combine a RC absorb device.It can absorb the switching overvoltage caused by switching of vacuum switch.
A surge capacitor, also known as a surge suppressor or surge protector capacitor, is an electrical component used to protect electronic devices and electrical equipment from voltage spikes or transient overvoltage.
Feature:
All-film low loss dielectric
Non-PCB insulating fluid
Fitted with internal discharge resistors
Hermetically sealed unit
High grade stainless steel enclosure
Applications:
Used in the application which has voltage spikes or transient overvoltage etc.
Motors and generators
Installations with vacuum switching devices
Transformers
MV switchgear and motor control centers
Usage condition
Ambient temperature:-40-+40C
Relative humidity :less than 95%.
Altitude : less than 1000m( customization acceptable)
Environment: no corrosive gas,steam or heavy dust and no violent vibration.( customization acceptable)
Technical Parameter
| Rated Frequency |
50/60Hz |
| Rated Voltage |
6.6/√3,11/√3,24/√3,35/√3,40.5/√3,115/√3 etc |
| Tangent loss angle (%) |
≤0.05(customization ≤0.001) |
| Capacity tolerance |
-10%~+10% |
| Electric medium |
Polypropylene full film |
| Impregnant |
not contain chlorinated biphenyls, environmentally friendly and non-toxic |
| Insulation Level(BIL)kV |
75,110,150 |
| Pole type |
3 or 1 |
| Allow long-term operation under 1.2 times rated voltage |
| Allow continuous operation at 1.3 times the rated current of steady state overcurrent caused by overvoltage,harmonics and capacitance deviation. |
Model Selection
When the surge capacitor works as over-voltage absorbing device of RC in series,it is commonly with the high-voltage resistor of not less than 200W and 100Ω. The resistors can be fixed in the top of capacitor's bushings,but not standing the mechanical stress.
Note:If you could not decide the model selection,please feel free to contact us.
We accept OEM business. If you have requirement for your new build panels, we can give a good price.
If it is retrofit project,please advise the original capacitor name plate, drawing and the reason of replacement. Such, we can recommend you replacement solution.
Standard:
GB/T11024.1- 2019 (IEC 60871-1:2014 MOD)
FAQ
Why do we use surge capacitors?
These power quality problems like voltage spikes or surges, which can occur due to lightning strikes, power grid fluctuations, or other electrical disturbances are can be protected by Sanhe surge capacitors.
How does surge capacitor protect loads?
The surge capacitor works by absorbing and dissipating the excess energy from the transient voltage spikes, diverting it away from the connected devices. It can act as a temporary storage for the excessive electrical energy and then release it slowly to the ground or back into the electrical system. This helps to maintain a more stable voltage level and prevent it from reaching dangerous levels that could damage the equipment.
Founded in 2002, Sanhe Power Tech is a national high-tech enterprise that specializes in power quality products, R&D of technology and solutions, production,service etc. It becomes industry-leading company.
The company has got multiple technologies including.
28 invention patents,
24 software copyrights,
22 national standards and 15 industry standards drafting.
Sanhe Power Tech is a member of international committees such as
the International Electrotechnical Commission (IEC)
the Institute of Electrical and Electronics Engineers (IEEE) etc.
The software development system has passed the CMMI evaluation of the American SEI.
There are three main business covering:
A full range of power quality testing and governance products and complete solutions.
Distributed new energy system products and advanced solutions.
Primary and secondary engineering based on "dual carbon" and energy management with standardized and professional engineering services.
Our Advantages
Simulation of GRID Reactive Load Flow
Analysis of L-C Circuit Amplitude-frequency Characteristic
Integration & Relay Coordination Reaction
Characteristic Curve of Permanent Magnet Breaker
Sampling & Filtering of Electronic Circuit
IGBT Driving & Protection
PWM Technology
Technology about Semiconductor Forced Commutation
Thermal Simulation & Heat Exchange Design
Feed-forward Second-order Complex Vector Algorithm
3D & Data Simulation
Instrumented IOT Communication
VP Scheduling & Dispatcher
Digital Twins of Micro-Grid & Islanding-Grid
FAQ
What kind of payment terms can we accept?
Payment in advance,Installment payments,Letter of credit(L/C).
What is the lead time of products?
According to different products, the lead time is different.
For standard products like APF,SVG, the lead time is one week.
For customized capacitor bank etc, the lead time is 25 to 45 days.
How to find the product model if you are some demand?
If you need our technical guide,please advise your problem details as much as you can,we can give more reasonable solution.
You may provide following drawings or report
Single line drawing
Panel primary scheme drawing
Power quality test report(mainly about harmonics)
How to find the product model if you have details electrical drawings?
Please advise Load name plate, load working condition, existing power factor, target power factor, harmonic times etc Or Rated voltage,compensation capacity, harmonic times(reactor detuning factor), other components etc.
How to find the product model if you can not provide enough information?
We can supply your products according to your technical requirement.
We can go to your project site and give a professional test report after test.
Why do we choose Sanhe power quality solution?
Sanhe has specialized in over 20 years experience in power quality products and solution. We have met most of power quality problems and gave the solutions.
What kind of technical service does Sanhe provide?
• Project-site power quality test ( or test report from customer)
• Improvement solution and budget
• Product solution and price
• Products supply
• Product commissioning
What kinds of standards does Sanhe product conform to?
Except China standards, Sanhe products also conform to IEC standards including
IEC61921 :2003 IEC61000-4-5:2005
IEC60529:2001 IEC60931-1: 1996
IEC60439-1 :2005 IEC60664-1 2007
IEC60831-1: 1996 IEC61000-4-3/2/4/5/18 IEC61000-2-4
IEC60255 IEC62208 2011…
IEC255-22-1
What is the compensation effect after using Sanhe products?
• Harmonic filtering meets standard
• Power factor is over 0.95,electrical bill saving,low reactive power penalty killing
• Reducing the loss of transformer and line
improve the distribution ability,
prolong the lifespan of electrical equipment
How long is the product guarantee time?
Usually,the guarantee time is one year. However,we can accept over 5 years too. Please contact our sales to get details information.
How to become the distributor or agent of Sanhe brand products?
Sanhe is looking for overseas distributor and agent. If you are interested in it, please feel free to contact us.
Audited Supplier 
){kind=link}