Customization: | Available |
---|---|
Task: | Adjust |
Structure: | Softstarer |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Basic parameters | ||
Type of load | Three-phase squirrel cage asynchronous and synchronous motors | |
AC voltage | under 1kV VAC | |
Service frequency | 50HZ/60HZ±2HZ | |
Phase sequence | allowed to work with any phase sequence (through setting parameter) | |
Composition of major loop | (12SCRS,18SCRS,30SCRS depend on model) | |
Bypass contactor | Contactor with direct starting capacity | |
Control power | AC220V±15% | |
Transient voltage overload | dv/dt snubber network | |
Start frequency | 1-6 time per hour | |
Ambient condition | Ambient temperature:-20°C -+50°C | |
Relative humidity:5%----95% no condensation | ||
Altitude less than 1500m(derating when altitude is more than 1500m) | ||
Protective functions | ||
Open-phase protection | Cut off any phase of primary power supply in the courage of starting or operation | |
Over-current protection in operation | Operational Over-current protection setting:20~500%le | |
Unbalanced phase current protection | Unbalanced phase current protection:0~100% | |
Overload protection | Overload protection grade:10A,10,15,20,25,30 | |
Under load protection | Under load protection grade:0~99% Action time of under load protection:0~250S | |
start timeout | Start timeout limit:0~120S | |
Over-voltage protection | When voltage of primary power supply is 120% higher than rated value,over-voltage protection is enabled. | |
Under-voltage protection | When voltage of primary power supply is 70% higher than rated value,over-voltage protection is enabled. | |
Phase protection | Allow to work with any phase sequence(through setting parameter) | |
Ground protection | Protection available when grounding current is higher than set value | |
Description of communication | ||
Protocol | Modbus RTU | |
Communication interface | RS485 | |
Network connection | Each can communicate with 32 SH-SPHMV equipment in network | |
Function | Operation state and programming can be observed through communication interface | |
Operating interface | ||
LCD display | LCD display/touch screen display | |
Language | Chinese an English | |
Keyboard | 6 touch membrane keyboard | |
Meter display | ||
Voltage primary power supply | Display voltage of three-phase primary power supply | |
Three-phase current | Display current of three-phase major loop | |
Date record | ||
Fault history | Record recent 15 faults information | |
History of number of starts | Record number of starts of this soft starter |